# Settings Not Saved

**URL:** <https://forum.duplicati.com/t/settings-not-saved/9919>\
**Category:** Support\
**Created:** [May 23, 2020, 1:19am UTC](https://forum.duplicati.com/t/settings-not-saved/9919 "2020-05-23T01:19:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Scott](https://forum.duplicati.com/letter_avatar_proxy/v4/letter/s/3e96dc/32.png) [@Scott](https://forum.duplicati.com/u/Scott)\
**Post date:** [May 23, 2020, 1:19am UTC](https://forum.duplicati.com/t/settings-not-saved/9919/1 "2020-05-23T01:19:55Z")

</div>

Hey Guys,

I installed Duplicati on my FreeNAS system. I then launched it by going to [http://192.168.42.209:8200](http://192.168.42.209:8200). I was asked for a passowrd and the default password “duplicati” worked. Once logged in I change some settings, including my password. The settings changed BUT…

After I re-start the Jail (or re-start the whole NAS) the settings are re-set to default. This includes the password, which is changed back to the default password of “duplicati”.

How can I make my settings save?

I notice there is something in the post install notes which says:  
“To change settings until the UI is fixed use the command line. Example: iocage get -P port PLUGIN  
Configurable settings are port and webpass.”

However I can’t really figure out what this means, and was hoping someone is able to help me?

---

<div class="post-metadata">

**Author:** ![drwtsn32](https://forum.duplicati.com/user_avatar/forum.duplicati.com/drwtsn32/32/2591_2.png) [@drwtsn32](https://forum.duplicati.com/u/drwtsn32)\
**Post date:** [May 23, 2020, 2:17pm UTC](https://forum.duplicati.com/t/settings-not-saved/9919/2 "2020-05-23T14:17:19Z")

</div>

This behavior is due to the design of the FreeNAS Duplicati module, not Duplicati itself. I’m not sure why it was designed this way.

A few options (like port number and password) must be set using FreeNAS iocage commands. Here’s a post that shows how to do it:

> [@FreeNAS 11.3 U1 - password resetting](https://forum.duplicati.com/t/freenas-11-3-u1-password-resetting/9603/6):
>
> Ok, I figured it out with the help of reading the notes! [Capture] I don’t know what they mean by “…until the UI is fixed…” In any case you use iocage commands to set the password in a persistent way. Don’t use the web UI in Duplicati to set the password, it won’t stick between plugin restarts: [Capture2] By the way, I am seeing that Jails on FreeNAS (and BSD I presume) are extremely similar to Docker containers. They are way more than just the chroot jails I was thinking…